We understand that it has become extremely vital to understand the importance of the internet in day-to-day activities. It is now common for everyone to be online for at least some part of the day. Since many activities are done during this time, having a consistent connection issue is the last thing that people desire. This is where comes the Netgear Extender Setup. It helps to provide a seamless and robust internet connection through all the corners of your home. Irrespective of how far-fetched they may be, having an extender means that there would not be any internet woes that you will have to face after that. So rest assured, you will get wifi coverage all over your home and the premises nearby. There will not be any dead zones or corners without an internet connection that you may have difficulty operating with.
Now, it could be possible that you may have just bought a Netgear Wifi Extender Setup and could be looking for various ways to set it up. We can assure you that there is nothing more that you will need than this guide for such a situation. We have compiled it for you so that you can find multiple ways to set up the Netgear wifi extenders. Not just that, along with that, you will also find step-by-step information for each kind of setup which will aid you to learn the little nuances of the project perfectly. So, follow the instructions that have been given carefully.
Netgear Extender Setup: Manual Method
If you wish to set up the wifi Extenders manually, you will need to have access to the default web interface. Use the following steps so that you could easily get access to the web GUI of Netgearwifi Extender.
- Firstly, you would need to do the basic setup, including unwrapping the extenders, installing the antennas of the extenders, and then connecting the extenders to the power supply plug.
- Now, you would have to connect the extenders with your router and turn on the power on them.
- Ṭhen switches the power on of your computer and subsequently launches its web browser.
- In the next step, search for the mywifiext.net setup in the search bar of your web browser.
Sometimes, there are instances when the users also happen to face ‘no internet connection issues at the time of connecting to the router setup page. However, if you are facing this same issue, feel free to connect to our experts.
- Moving further, the mywifiext.net setup URL will take you to the extender setup login page of Netgearwifi. Here, you’ll need to sign in to the router with the help of this page. So, once that happens, just enter the default username and password in the required fields and then select the Login button to log in.
- After you log in, you will soon see that you will land on the dashboard of the range extender page.
- Using the dashboard of the range extender page, you would now have to select the wifi network you want to extend. You will have to do this with the help of the new extender setup.
- Then, after that, select the Next button. At this stage, you’ll be asked to put in your wifi passphrase.
- Lastly, this step will require you to enter the required details and then select the Finish button when you’re ready to complete the extender setup process.
With this, the setup process is complete. Another name for the manual setup which is interchangeably used is the Netgear Installation Assistant method. But it would help if you noted that now the router network name will be renamed in the form of Netgear_ext SSID.
This is also when you are free to relocate your extenders to the location of your preference. But before relocating your extenders, you must take care of the following things:
- Firstly, the new location of your extenders shouldn’t be out of the range of your wifi routers at any point.
- Secondly, it would be better to place the extenders at all the places, especially where the wifi signals are weak. Therefore, to tackle this, we’d suggest you place the router wisely. Do it in such a way so that it effectively covers all the dead zones of the house.
- Thirdly, you must ensure that the wifi signals of your extender don’t interfere with the wifi signals of other devices. These could be anything such as cell phones, microwaves, baby monitors, refrigerators, Bluetooth devices, etc.
Netgear wifi Extender Setup: WPS Method
Some users could find the Manual setup of extenders a little lengthy and a bit more complex than usual. If this is the same case with you, then you must try the WPS method. If you did not know, then you must learn that the complete form of WPS is a wifi Protected Setup.
Follow these steps if you want to go ahead with the WPS setup of the wifi extenders:
- In the first step, you should turn the power on for all the extenders. At the same time, you should also ensure that all the LEDs of the extenders light up green.
- Secondly, all the LEDs of the extenders must light up when you turn the power on the router. If you see that any of the LEDs have failed to light up, then it is quite possible that there could be a power issue. In such a circumstance, you will need to repeat the first step.
- Moving to the further step, if you are sure that all the LEDs of the extenders light up green, then you should need to look for the extender’s WPS button. The location of the WPS button could be different for various other models of the Netgear extenders. Therefore, we will suggest you have a look at the side panels of your extender so that you can find the WPS button.Finally, you will need to press the WPS button of your wifi router. Wait patiently till all the LEDs of the devices become solid green, and then you should know that you are good to go.
Once you’ve successfully completed all the steps mentioned above, then you should know that the Extender setup while using the WPS button is complete. Now you could easily unplug the extenders and then place them in different locations. If you go by our recommendations, we will suggest that you place the extenders in poor wifi connectivity locations. And please remember that the setup will change your router network (SSID) name in the form of Netgear_ext (SSID). You have the option of connecting your Wi-Fi-enabled devices to this network and be able to enjoy fast-speed internet in the most remote zones of your house.
Netgear wifi Extender Setup using an Ethernet Connection
A lot of the wifi routers do not support WPS connectivity. So what to do then? In such cases, you could always connect and then set up the extenders by using an Ethernet connection.
Follow these steps to set up and install all the range extenders while using an Ethernet connection: So firstly, you will need to place all the extenders close to the home wifi router.
- Then you would need to connect them with the help of an Ethernet wire. But it would help if you made sure that the Ethernet cable that you are using is not damaged.
- In the third step, put one end of the cable into the extender port and another into the router’s Ethernet port.
- Then turn the power on for both of your wifi range extenders and the home wifi router.
- Now, feel free to launch any web browser that will be there on your PC or laptop.
- Then try to look for the Netgear Extender login webpage. You could easily find it in the search bar.
- Once you successfully land on the extender login page, you will need to fill in the required details and log in to the router setup page.
- If you are logging in to your Router for the very first time, then you would have to use the default login credentials for logging in.
- Now once you have made the login possible, a Netgear genie Wizard will appear on the screen.
- Here you would have to select the extender network that you want to extend in your premises.
- After you have done selecting the extender’s network, then tap on the Continue button.
- Now, at this stage, you could also set up the security settings of your extended network.
- Then it would help if you typed in the network password in the designated Passphrase column.
- After this again, you should tap on the Continue button.
- This way, the system will save all the changes you have made so far.
- And lastly, tap on the Finish button when you are ready to complete the extender setup process.
Thus, with this, you would have successfully set up your extenders by using the ethernet cable. Now you could easily connect the WiFi-enabled devices with the extended network. But you must make sure that you connect to the Netgear_ext SSID as it is now going to be the new name of your router network.
Netgear wifi Extender Setup by using the Nighthawk app
Yes, you read it right! The Netgear Extenders can also be set up by using the Nighthawk app. So all you need to do is just follow the following steps so that you are able to set up the Netgear Extenders with the help of the Nighthawk application:
- So for the first step, download the Nighthawk app on your smartphone.
- Second, if you are an Android user, then use the play store app to download the Nighthawk app.
- On the other hand, if you use an iOS device, then you could download the app from the Apple app store.
- Now, after downloading and installing the Nighthawk app, try to open it on your device and then agree to its terms and conditions.
- At this step, try to log in to your Netgear account by using your Netgear login credentials.
- Now facilitate the connection to your WiFi-enabled device to the extender’s Netgear_ext SSID.
- Lastly, follow the given on-screen instructions to further set up the Netgear extenders with the help of the Nighthawk app.
Once you have successfully completed the on-screen instructions, your wifi extenders will be fully set up and functional.
